-
Rear window panel
¥31,625
GB rear window panel A convenient item that allows you to effectively utilize the limited interior space of Jimny. Easy to install! Designed specifically for Jimny, the fit is perfect! Size: Width approx. 600mm x Height approx. 370mm Planning: Japan Manufacture: China In order to ensure that you can purchase with confidence, we open all products and check the condition of the product and ensure that there are no defects in the paint (including mounting bolts and metal fittings) before shipping. Please note that as this is an overseas product, there may be some scratches, dirt, uneven paint, etc. If items such as bolts are lost or damaged during assembly, please contact us so we can help. *Please note that we do not accept returns after opening the product.
-
glass lid Grow to Beecle
¥21,252
Glass lid with Grow to Beecle logo! This is a recommended part for one-point exterior customization. We also have fuel tank cap stickers and rings, so please enjoy matching them Compatible models:JB74 Jimny Sierra You can replace the genuine fuel lid cover with a glass lid. *Please reuse the genuine springs and rubber parts that you removed. *This product is not eligible for discount coupons. note that.
-
glass lid gooniesone
¥21,252
Glass lid with Gooniesone logo! This is a recommended part for one-point exterior customization. We also have fuel tank cap stickers and rings, so please enjoy matching them. Compatible models: JB74 Jimny Sierra You can replace the genuine fuel lid cover with a glass lid. *Please reuse the genuine springs and rubber parts that you removed. *This product is not eligible for discount coupons. note that.
-
Tie down belt
¥4,430
GROW TO BEECLE tie-down belt Great compatibility with GB roof rack! Ideal for in-vehicle use, camping, and securing luggage. 3m x 2 pieces set *The GROW TO BEECLE logo is only on one side of the belt.
-
floor mat Grow to beecle
¥22,770
Grow to Beecle】From the brand Introducing new items that will make your Jimny even better! ! 3D floor mat for Jimny JB64/JB74 (1 car) Please select the transmission when ordering. (For MT, AT) Exclusively designed to perfectly fit Jimny JB64.JB74! Comes with a luxurious Grow to Beecle logo plate. Easy to clean even if it gets dirty! It can also be washed with water. 【color】 gray [Material] Surface: TPE thermoplastic elastomer Back side: XPE foam material [Compatible models] Jimny Jimny Sierra Model: JB74W Compatible with all grades
-
GB ultralight feather bumper aluminum front
¥113,850
Completely original design! ! Super lightweight front bumper! There are many well-designed external steel bumpers, but the weight is still a bottleneck, and there are concerns about reduced fuel efficiency and reduced operability. The main body material of this bumper is made of aluminum, and the total weight including the included skid plate is a whopping 12.1kg! The ultra-lightweight design allows for light and stress-free handling of the front wheel while driving, and prevents fuel consumption from declining. Compared to steel, the bending strength is inferior, but the strength of the material itself is metal, so there is no need to worry. It has a 3-part structure where the center bumper and both side bumpers can be removed, so you can change the shape depending on your ingenuity. This time, the pipe shape is used for the side bumpers to create an off-road feel. We are planning to release various types of side bumpers in the future. It uses aluminum material, which is expensive and difficult to mold, and requires high welding technology. The product price is higher than the steel bumper of other companies, but I think that it is a product that you will surely be satisfied with. packing size:Length 43cm /Width 98cm /Height 30/weight 16kg [Compatible models] Suzuki/ Sierra,Samurai,Santana,Gypsy Model: JB74W *It is recommended to install the angle adjustment stay when installing the front number. (Continuous inspection support) *JC grade headlight washers are not supported. ※Depending on the country, additional customs duties may apply. Please check for yourself. *Jimny front bumper reference YouTube → https://www.youtube.com/watch?v=qg2_DSxin-k 梱包サイズ:長さ43cm / 幅98cm / 高さ30 / 重さ16kg
-
GB short basket aluminum roof rack
¥64,515
https://gooniesone.jp/jb64custom/20210427145654/ It is a roof rack that can be attached to Suzuki/ Sierra,Samurai,Sanntana,Gypsy Model: JB74W We are also particular about the design so that it fits the appearance image of Jimny sierra. A roof rack set that can be installed without a base carrier. The roof rack part is made of aluminum, and the foot part is made of steel to increase strength. The painting is a black powder coat finish after cationic electrodeposition painting. The bolts and feet are also treated with anti-rust treatment, so rust is less likely to occur. size 104cm long x 126cm wide (lower rack) / 82cm long x 108cm wide (upper rack) Height 19cm (lower rack) 27cm (upper rack) It is designed to suppress wind noise and resonance noise when driving. A set of 4 round hook plates that are convenient for mounting on the roof rack surface. *Please be careful not to place an object that concentrates the weight on one point or places an object with an extremely high center of gravity. *Since the foot holder is in direct contact with the vehicle, it may be scratched. Attach the enclosed protective seal to the foot. *Product assembly is required for installation. An assembly manual is enclosed. It takes 1 hour to 1 hour 30 minutes to assemble, and two people are recommended to install it on the vehicle. In order to ensure that you can purchase with peace of mind, we open all products before shipping and check that there are no defects in the condition of the product or painting (including mounting bolts and metal fittings) before shipping. Please note that this is an overseas product, so there may be some scratches, stains, uneven paint, etc. Please contact us if you have lost or damaged a product such as a bolt during assembly. *Please note that we do not accept returns after opening the product. ※Depending on the country, additional customs duties may apply. Please check for yourself. Maximum load capacity: 28kg Gross Weight: 13.5kg Material: Body: Extruded aluminum material Corner parts/PA6+GF (reinforced plastic) Reinforcing material and foot part/iron (powder coat) Accessories: Towing eye plate (iron) x 4 included Coating: Cationic electrodeposition coating, black powder coat finish Size: length 104cm, width 126cm, height 19cm (lower rack) 27cm (upper rack) Planning: Japan Manufacturing: China Compatible models: Suzuki/ Sierra,Samurai,Sanntana,Gypsy JB74 packing size:Length 28cm /Width 117cm /Height 28.5cm/weight 16kg 梱包サイズ:長さ28cm / 幅117cm / 高さ28.5cm / 重量16kg ※Assembly video Youtube → https://www.youtube.com/watch?v=fz6GBiw2uU4
-
GB roof basket aluminum roof rack 3 foot type
¥77,165
It is a roof rack that can be attached to the Suzuki/ Sierra,Samurai,Sanntana,GypsyJB74. We are also particular about the design so that it fits the appearance image of Jimny A roof rack set that can be installed without a base carrier. The total weight is 14.8kg, the roof rack part is made of aluminum, and the foot part is made of steel to increase strength. The painting is a black powder coat finish after cationic electrodeposition painting. The bolts and feet are also treated with anti-rust treatment, so rust is less likely to occur. The size is length 154 cm, width 126 cm, height 19 cm (lower rack) 27 cm (upper rack) It is designed to suppress wind noise and resonance noise when driving. A set of 8 round hook plates that are convenient for mounting on the roof rack surface. Maximum load capacity: 40kg Gross Weight: 14.8kg Material: Main body aluminum extruded material Corner parts/PA6+GF (reinforced plastic) Reinforcing material and foot part/iron (powder coat) Accessories: Towing eye plate (iron) x 8 included Coating: Cationic electrodeposition coating, black powder coat finish Size: length 154cm, width 126cm, height 19cm (lower rack) 27cm (upper rack) Planning: Japan Manufacturing: China packing size:Length 27cm /Width 147.5cm /Height 20cm [Compatible models] Suzuki/ Sierra,Samurai,Sanntana,Gypsy Model: JB74W 梱包サイズ:長さ27cm /幅147.5cm /高さ20cm *Please be careful not to place an object that concentrates the weight on one point or place an object with a high center of gravity. *Since the foot holder is in direct contact with the vehicle, it may be scratched. Attach the enclosed protective seal to the foot. *Product assembly is required for installation. An assembly manual is enclosed. It takes 1 hour to 1 hour 30 minutes to assemble, and two people are recommended to install it on the vehicle. In order to ensure that you can purchase with peace of mind, we open all products before shipping and check that there are no defects in the condition of the product or painting (including mounting bolts and metal fittings) before shipping. Please note that this is an overseas product, so there may be some scratches, stains, uneven paint, etc. Please contact us if you have lost or damaged a product such as a bolt during assembly. *Please note that we do not accept returns after opening the product. ※Depending on the country, additional customs duties may apply. Please check for yourself. ※Assembly video Youtube →https://www.youtube.com/watch?v=rC9bS0A_zjs *Buyer's YouTube → https://www.youtube.com/watch?v=BiMgzZBEZxE → https://www.youtube.com/watch?v=cfsejoM2nJc → https://www.youtube.com/watch?v=hKv6ZWCxWFc
-
GB roof basket aluminum roof rack 2 foot type
¥72,105
https://gooniesone.jp/jb64custom/roofbasket/ It is a roof rack that can be attached to the Suzuki/ Sierra,Samurai,Sanntana,Gypsy Model: JB74W We are also particular about the design so that it fits the appearance image of Jimny ♪ *This product has been improved from the conventional 2-foot type on one side to a 3-foot type in order to increase stability and load capacity for owners who load heavy loads. Even with the conventional 2-foot type, a general load capacity is secured. Please select according to the purpose of the owner. A roof rack set that can be installed without a base carrier. The total weight is 14.8kg, the roof rack part is made of aluminum, and the foot part is made of steel to increase strength. The painting is a black powder coat finish after cationic electrodeposition painting. The bolts and feet are also treated with anti-rust treatment, so rust is less likely to occur. The size is length 154 cm, width 126 cm, height 19 cm (lower rack) 27 cm (upper rack) It is designed to suppress wind noise and resonance noise when driving. A set of 8 round hook plates that are convenient for mounting on the roof rack surface. Maximum load capacity: 40kg Gross Weight: 14.8kg Material: Main body aluminum extruded material Corner parts/PA6+GF (reinforced plastic) Reinforcing material and foot part/iron (powder coat) Accessories: Towing eye plate (iron) x 8 included Coating: Cationic electrodeposition coating, black powder coat finish Size: length 154cm, width 126cm, height 19cm (lower rack) 27cm (upper rack) Planning: Japan Manufacturing: China packing size:Length 27cm /Width 147.5cm /Height 20cm [Compatible models] Suzuki/ Sierra,Samurai,Sanntana,Gypsy Model: JB74W 梱包サイズ:長さ27cm /幅147.5cm /高さ20cm *Please be careful not to place an object that concentrates the weight on one point or place an object with a high center of gravity. *Since the foot holder is in direct contact with the vehicle, it may be scratched. Attach the enclosed protective seal to the foot. *Product assembly is required for installation. An assembly manual is enclosed. It takes 1 hour to 1 hour 30 minutes to assemble, and two people are recommended to install it on the vehicle. In order to ensure that you can purchase with peace of mind, we open all products before shipping and check that there are no defects in the condition of the product or painting (including mounting bolts and metal fittings) before shipping. Please note that this is an overseas product, so there may be some scratches, stains, uneven paint, etc. Please contact us if you have lost or damaged a product such as a bolt during assembly. *Please note that we do not accept returns after opening the product. ※Depending on the country, additional customs duties may apply. Please check for yourself. ※Assembly video Youtube →https://www.youtube.com/watch?v=rC9bS0A_zjs ※of the purchaser YouTube → https://www.youtube.com/watch?v=BiMgzZBEZxE → https://www.youtube.com/watch?v=cfsejoM2nJc → https://www.youtube.com/watch?v=hKv6ZWCxWFc
-
GB rear ladder
¥37,318
imny parts brand from Goonies One Side ladder for Jimny Sierra from "GROWTOBEECLE". It is especially useful when loading and unloading the roof basket! The GB rear ladder is designed with practicality in mind. Product Specifications】 ・Requires assembly ・Frame: Steel with anti-rust cationic paint + powder coat finish ・Step adopts aluminum extrusion material with anti-slip ribs to reduce overall weight (Alumite processing with high abrasion resistance is applied.) ・Withstand load: 80 kg in the vertical direction packing size:Length 21cm /Width 105cm /Height 10cm/weight 5kg [Compatible models] Suzuki/ Sierra,Samurai,Sanntana,Gypsy Model: JB74W 梱包サイズ:長さ21cm / 幅105cm / 高さ10cm / 重さ5kg *It can be installed when genuine rear tire 175/80R16 + genuine optional spare tire cover (hard type) is installed.The matching of the external hard cover is not possible. *It cannot be installed if the size of the rear tire is increased. [Product Notes] In order to ensure that you can purchase with peace of mind, we open all products before shipping and check that there are no defects in the condition of the product or painting (including mounting bolts and metal fittings) before shipping. Please note that this is an overseas product, so there may be some scratches, stains, uneven paint, etc. Please contact us if you have lost or damaged a product such as a bolt during assembly. ※Depending on the country, additional customs duties may apply. Please check for yourself.
-
GB rear wide center ladder
¥65,780
I want a rear ladder that is cool and highly "practical"! We have commercialized it based on the opinions of our customers who use our roof baskets. A rear ladder that gives a sense of stability when loading luggage on the roof rack and roof carrier. It is designed with a high degree of freedom of use that can also be attached to the center plate part, such as ROTOPAX which American container case. We recommend installing it together with our rear gate spare tire cover (sold separately). *Cannot be installed together with other company's spare tire cover. *Please note that rear tires cannot be installed when installing this ladder. ・By making full use of extruded aluminum steel, we were able to achieve both light weight and high rigidity, while at the same time creating a design unlike any other manufacturer's product. ・We also perform cationic treatment with excellent corrosion resistance and high-quality powder coating and alumite treatment. ・As it is an assembly type, please refer to the enclosed instruction manual and assemble it. 【Product Specifications】 ・Main shaft: Extruded aluminum + cationic paint + powder coat ・Tread: Extruded Aluminum + Silver Anodized ・ Center plate part: iron ・Withstand load: 100 kg in the vertical direction packing size:Length 27.5cm /Width 105cm /Height 11cm/weight 10kg [Compatible models] Suzuki/ Sierra,Samurai,Sanntana,Gypsy Model: JB74W 梱包サイズ:長さ27.5cm / 幅105cm / 高さ11cm / 重さ10kg [Product Notes] In order to ensure that you can purchase with peace of mind, we open all products before shipping and check that there are no defects in the condition of the product or painting (including mounting bolts and metal fittings) before shipping. Please note that this is an overseas product, so there may be some scratches, stains, uneven paint, etc. Please contact us if you have lost or damaged a product such as a bolt during assembly. ※Depending on the country, additional customs duties may apply. Please check for yourself.
-
GB rear wide center ladder, GB rear gate cover set
¥93,725
GB rear wide center ladder + GB rear gate cover set 【 GB rear wide center ladder 】 I want a rear ladder that is cool and highly "practical"! We have commercialized it based on the opinions of our customers who use our roof baskets. A rear ladder that gives a sense of stability when loading luggage on the roof rack and roof carrier. It is designed with a high degree of freedom of use that can also be attached to the center plate part, such as Rotopax. *Please note that rear tires cannot be installed when installing this ladder. ・By making full use of extruded aluminum steel, we were able to achieve both light weight and high rigidity, while at the same time creating a design unlike any other manufacturer's products. ・We also perform cationic treatment with excellent corrosion resistance and high-quality powder coating and alumite treatment. ・As it is an assembly type, please refer to the enclosed instruction manual and assemble it. [Product specifications] ・Main shaft: Extruded aluminum + cationic paint + powder coat ・Tread: Extruded Aluminum + Silver Anodized ・ Center plate part: iron ・Withstand load: 100 kg in the vertical direction packing size:Length 27.5cm /Width 105cm /Height 11cm/weight 10kg Length 52.5cm /Width 105cm /Height 11cm/weight 3kg [Compatible models] Suzuki/ Sierra,Samurai,Sanntana,Gypsy Model: JB74W 梱包サイズ:長さ27.5cm / 幅105cm / 高さ11cm / 重さ10kg 長さ52.5cm / 幅105cm / 高さ11cm / 重さ3kg 【GB rear gate cover 】 It is a product that can be installed when the spare tire of the rear gate is removed. The material is ABS + acrylic 2-layer resin that combines strength and durability, which is also used for roof boxes. It will be delivered as an "unpainted product". You can use it as is, or you can paint it in the same color as the body. *When installing together with the ladder, it is necessary to drill two holes as shown in the image. *If you would like to have a hole drilled, please message us when purchasing. [Product notes In order to ensure that you can purchase with peace of mind, we open all products before shipping and check that there are no defects in the condition of the product or painting (including mounting bolts and metal fittings) before shipping. Please note that this is an overseas product, so there may be some scratches, stains, uneven paint, etc. Please contact us if you have lost or damaged a product such as a bolt during assembly. ※Depending on the country, additional customs duties may apply. Please check for yourself.